Our new 37" wide belt sander is a perfect machine for woodworking shops of all sizes. The belt length is 75" which is the same length as much larger machines. The longer the belt it will not only last longer due to more abrasive material it will also run cooler. This machine is equipped with 1 combination head. This means you can sand either using the drum or the sanding platen or both at the same time. Due to the large HP motor (20 HP) the machine is capable of dimensioning even wide boards. This is important for customers who do not own a thickness planer. When you use the machine to dimension your work only very aggressive paper 60 or 80 grit should be used. The heavy carpet feed belt is powered by a seperate 1/2HP motor and the feed speed is adjustable from 12 to 60 fpm. You can adjust the thickness in 4 ways:
Manual handwheel on the bottom of the machine.
By pressing the up or down arrow the table will move in desired direction. By tapping these same arrows the machine will move an exact amount each tap.
Input a set dimension on the key pad and machine will go to that dimension
The auto thickness gage will measure your wood piece and automatically set the table to the thickness of the piece of wood inserted.
We all dislike hand sanding. This machine is a Joy to operate
Pro 37" Widebelt Sander 20HP 3 phase Specs
Main motor: 20HP
Variable feed speed: 1HP
Table lifting motor: 0.25HP
Voltage: 220V / THREE PHASE
Max sanding height: 150mm/5.9"
Min sanding height: 1/4" [6,4 mm]
Max sanding width: 36 1/2" [927 mm]
Sanding belt size: 37" X 75" [940 mm X 1905 mm]
Adjustable sanding platen: 1-3/4" inch [45 mm]
Diameter of sanding drum: 4" [100 mm]
Length of sanding drum: 37" [965 mm]
Sanding drum RPM: 1725 RPM
Conveyor speed: 12-60 FPM,
Dust port size: 4" [100 mm]
Number of dust ports 3
Foot print: 19 inches X 51 inches [483 mm X 1300 mm]
Width X Depth: 56,5 inches X 52 inches [650 mm X 1320 mm]
Height with dust collection ports: 77,5 inches [1968 mm]
Height without dust collection ports: 71,5 inches [1816 mm]
Conveyor height at lowest setting: 32 inches [813 mm]
Operating air pressure: 6 Bar
Sanding belt oscillation: Adjustable
Sanding belt motor break: Yes. Air operated disc break
Our wide range of sanders is sure to impress you and is designed to keep your sanding time to a minimum. From our bench top 12" disk sander to our monster 52" widebelt sander we have the right machine for you.