Our new 43 2RK (Roller + Combo head) wide belt sander is a perfect machine for any woodworking shop. 
The belt length is 75" which is the same length as much larger machines. The longer the belt it will not only last longer due to more abrasive material it will also run cooler.
This machine is equipped with 1 ( 8”) roller and a second (4”) roller followed by a wide platen for fine finish. This allows you to use

a rougher grit on first roller (8”) that will absorb most of the impact and do the dimensioning while the second roller (4”) with the

Platen can have a finer grit. This will save time over having to run your production through the machine 2 times & change belt grit.

Due to the large HP motor (25 HP) the machine is capable of dimensioning even wide boards. This is important for customers who do not own a thickness planer. When you use the machine to dimension your work only very aggressive paper 60 or 80 grit should be used.
The heavy carpet feed belt is powered by a separate 2HP motor and the feed speed is adjustable from 12 to 60 fpm.
You can adjust the thickness in 4 ways:

• Manual hand-wheel on the bottom of the machine. (Fine tune only)
• By pressing the up or down arrow the table will move in desired direction. By tapping these same arrows the machine will move an exact amount each tap.
• Input a set dimension on the key pad and machine will go to that dimension
• The auto thickness gage will measure your wood piece and automatically set the table to the thickness of the piece of wood inserted.

 We all dislike hand sanding. This machine is a Joy to operate